$20.00
TANGLE-FREE
The top three feet of this 5 ft long x 1 in diameter aluminum pole spins on ball bearing to keep the flag from tangling around the pole.
“Spinning Poles”
If the flag attempts to tangle, the top section of the pole rotates on ball bearings so the weight of the flag corrects it. Recommended for nylon flags up to 3 ft x 5 ft. May be used with any bracket for a 1 in diameter pole.
The top three feet of this 5 ft long x 1 in diameter aluminum pole spins on ball bearing to keep the flag from tangling around the pole. Topped with a silver plastic ball. Includes two mounting rings for use with grommetted flags and an upper clip for use with flags & banners that have sleeves. Anodized aluminum finish.
You must be logged in to post a review.
20 ft Bronze “Titan” telescoping aluminum flagpole with dark bronze anodized finish (nearly black). Sections held in place by internal interlocking sleeves, engaged by twisting the section 1/4 turn. 3 in base diameter. Base section has 12-gauge (0.080 in) wall thickness; all other sections are 14 gauge (0.065 in). Includes rotating polycarbonate rings with stainless steel spring clips to hold up to two flags, 3 in diameter gold anodized spun aluminum ball, plastic ground sleeve and 4 ft x 6 ft U.S. flag with sewn stripes and embroidered stars. Flagpole and flag are both made in the USA.
25 ft “Titan” telescoping aluminum flagpole with Dark Bronze (nearly Black) finish. Sections held in place by internal interlocking sleeves, engaged by twisting the section 1/4 turn. 3 in base diameter. Base section has 12-gauge (0.080 in) wall thickness; all other sections are 14 gauge (0.065 in). Includes rotating polycarbonate rings with stainless steel spring clips to hold up to two flags, 3 in diameter gold anodized spun aluminum ball, plastic ground sleeve and an extra-large 5 ft x 8 ft U.S. flag with sewn stripes and embroidered stars. Flagpole and flag are both made in the USA. The standard Titan flagpole kit comes with a 4 ft x 6 ft flag,and can accommodate a second 3 ft x 5 ft flag (total flag area = 39 square feet). A second flag should not be flown with a 5 ft x 8 ft flag, which by itself has an area of 40 square feet. NOTE: Flagpole with ground sleeve are shipped by UPS. Flag and ball are shipped by Priority Mail and may arrive at a different time than flagpole.
Lightweight aluminum telescoping flagpole. Extend to any length from 42-1/2 in to 11 ft – 6 in by twisting each of four sections to lock in place. Wire clips to hold one flag of any size up to 3 ft x 5 ft. Bottom section is 7/8 in diameter and top section is 1/2 in diameter with gold tip. May be hand held or used with tire or ground mounts (sold separately).
SERIES IWW Tapered Aluminum Flagpole: Includes seamless shaft of 6063 alloy with satin finish – aluminum revolving cone-style truck with pulley – stainless steel cable internal halyard – manually operated stainless steel winch with removable crank handle – flush mount locking access door – two stainless steel swivel flagsnaps with covers – beaded retaining ring with counterweight – spun aluminum gold anodized ball – spun aluminum flash collar – galvanized steel ground sleeve with base plate and grounding spike. Made in the U.S.A. Prices include delivery in 48 states. SELECT: Height x Base diameter x Wall thickness – BELOW:
Silver cast aluminum bracket for 1 in diameter flagpole. Holds flagpole at either a 45-degree angle or horizontally. Includes thumbscrew to secure flagpole in bracket and three mounting screws. Ideal for decorative banners and vertical sports banner.
25 ft “Titan” telescoping aluminum flagpole with Bronze finish. Sections held in place by internal interlocking sleeves, engaged by twisting the section 1/4 turn. 3 in base diameter. Base section has 12-gauge (0.080 in) wall thickness; all other sections are 14 gauge (0.065 in). Includes rotating polycarbonate rings with stainless steel spring clips to hold up to two flags, 3 in diameter gold anodized spun aluminum ball, plastic ground sleeve and an extra-large 5 ft x 8 ft U.S. flag with sewn stripes and embroidered stars. Flagpole and flag are both made in the USA. The standard Titan flagpole kit comes with a 4 ft x 6 ft flag,and can accommodate a second 3 ft x 5 ft flag (total flag area = 39 square feet). A second flag should not be flown with a 5 ft x 8 ft flag, which by itself has an area of 40 square feet. NOTE: Flagpole with ground sleeve are shipped by UPS. Flag and ball are shipped by Priority Mail and may arrive at a different time than flagpole.
20 ft Silver “Titan” telescoping aluminum flagpole with clear anodized finish. Sections held in place by internal interlocking sleeves, engaged by twisting the section 1/4 turn. 3 in base diameter. Base section has 12-gauge (0.080 in) wall thickness; all other sections are 14 gauge (0.065 in). Includes rotating polycarbonate rings with stainless steel spring clips to hold up to two flags, 3 in diameter gold anodized spun aluminum ball, plastic ground sleeve and 4 ft x 6 ft U.S. flag with sewn stripes and embroidered stars. Flagpole and flag are both made in the USA.
Reviews
There are no reviews yet.