$35.00
Spun aluminum flash collar with anodized finish for 3″ diameter “Titan” telescoping flagpole. 12″ diameter x 1-3/4″ high. Note: There is a small bare spot in the finish on the edge that is caused by a fixture holding the flash collar while it is being anodized. Select Silver or Dark Bronze (Black) finish from menu below.
Spun aluminum flash collar with anodized finish for 3″ diameter “Titan” telescoping flagpole. 12″ diameter x 1-3/4″ high.
Note: There is a small bare spot in the finish on the edge that is caused by a fixture holding the flash collar while it is being anodized.
| FINISH | Silver, Dark Bronze (Black) |
|---|
25 ft Dark Bronze (Black) “Titan” telescoping aluminum flagpole with dark bronze anodized finish (nearly black). Sections held in place by internal interlocking sleeves, engaged by twisting the section 1/4 turn. 3 ft base diameter. Base section has 12-gauge (0.080 in) wall thickness; all other sections are 14-gauge (0.065 in). Includes rotating polycarbonate rings with stainless steel spring clips to hold up to two flags, 3 in diameter gold anodized spun aluminum ball, plastic ground sleeve and 4 ft x 6 ft U.S. flag with sewn stripes and embroidered stars. Flagpole and flag are both made in the USA. NOTE: To prevent damage the gold ball is shipped by Priority Mail and may arrive before or after the flagpole.
SERIES R Tapered Aluminum Flagpole:
Includes one-piece seamless shaft of 6063 alloy with satin finish / cast aluminum stationary truck with pulley, braided polypropylene halyard / two stainless steel swivel flagsnaps with covers / 9 in cast aluminum cleat / spun aluminum gold anodized ball, spun aluminum flash collar / PVC ground sleeve
SELECT: Height x Base diameter x Wall thickness BELOW
20 ft Silver “Titan” telescoping aluminum flagpole with clear anodized finish. Sections held in place by internal interlocking sleeves, engaged by twisting the section 1/4 turn. 3 in base diameter. Base section has 12-gauge (0.080 in) wall thickness; all other sections are 14 gauge (0.065 in). Includes rotating polycarbonate rings with stainless steel spring clips to hold up to two flags, 3 in diameter gold anodized spun aluminum ball, plastic ground sleeve and 4 ft x 6 ft U.S. flag with sewn stripes and embroidered stars. Flagpole and flag are both made in the USA.
SERIES ESR Tapered Aluminum Flagpole:
Includes seamless shaft of 6063 alloy with satin finish – cast aluminum revolving truck with pulley – braided polypropylene halyard – two stainless steel swivel flagsnaps with covers – cast aluminum cleat – spun aluminum gold anodized ball – spun aluminum flash collar – galvanized steel ground sleeve with base plate and grounding spike.
SELECT: Height x Base diameter x Wall thickness BELOW
Easy Do-It-Your-Self installation. Kit comes complete with foundation sleeve, 16 gauge satin-finish aluminum pole sections, cast aluminum stationary truck with nylon pulley, gold anodized spun aluminum ball ornament, braided polypropylene halyard, cast aluminum cleat, nylon flag snaphooks and an American-made U.S. nylon flag with sewn stripes and embroidered stars, white canvas heading & two brass grommets. The 2-1/2 in diameter pole is 25 ft above ground & comes with a 4 ft x 6 ft U.S. flag. Shippable by UPS.
25 ft “Titan” telescoping aluminum flagpole with Bronze finish. Sections held in place by internal interlocking sleeves, engaged by twisting the section 1/4 turn. 3 in base diameter. Base section has 12-gauge (0.080 in) wall thickness; all other sections are 14 gauge (0.065 in). Includes rotating polycarbonate rings with stainless steel spring clips to hold up to two flags, 3 in diameter gold anodized spun aluminum ball, plastic ground sleeve and an extra-large 5 ft x 8 ft U.S. flag with sewn stripes and embroidered stars. Flagpole and flag are both made in the USA. The standard Titan flagpole kit comes with a 4 ft x 6 ft flag,and can accommodate a second 3 ft x 5 ft flag (total flag area = 39 square feet). A second flag should not be flown with a 5 ft x 8 ft flag, which by itself has an area of 40 square feet. NOTE: Flagpole with ground sleeve are shipped by UPS. Flag and ball are shipped by Priority Mail and may arrive at a different time than flagpole.
25 ft Silver “Titan” telescoping aluminum flagpole with clear anodized finish. Sections held in place by internal interlocking sleeves, engaged by twisting the section 1/4 turn. 3 in base diameter. Base section has 12-gauge (0.080 in) wall thickness; all other sections are 14 gauge (0.065 in). Includes rotating polycarbonate rings with stainless steel spring clips to hold up to two flags, 3 in diameter gold anodized spun aluminum ball, plastic ground sleeve and 4 ft x 6 ft U.S. flag with sewn stripes and embroidered stars. Flagpole and flag are both made in the USA.
25 ft “Titan” telescoping aluminum flagpole with Dark Bronze (nearly Black) finish. Sections held in place by internal interlocking sleeves, engaged by twisting the section 1/4 turn. 3 in base diameter. Base section has 12-gauge (0.080 in) wall thickness; all other sections are 14 gauge (0.065 in). Includes rotating polycarbonate rings with stainless steel spring clips to hold up to two flags, 3 in diameter gold anodized spun aluminum ball, plastic ground sleeve and an extra-large 5 ft x 8 ft U.S. flag with sewn stripes and embroidered stars. Flagpole and flag are both made in the USA. The standard Titan flagpole kit comes with a 4 ft x 6 ft flag,and can accommodate a second 3 ft x 5 ft flag (total flag area = 39 square feet). A second flag should not be flown with a 5 ft x 8 ft flag, which by itself has an area of 40 square feet. NOTE: Flagpole with ground sleeve are shipped by UPS. Flag and ball are shipped by Priority Mail and may arrive at a different time than flagpole.